Different material shrinkage will produce problems, such as product sink, deformation warpage, size abnormality, batch front, etc. Therefore, mastering the skill of using good pressure-holding can solve most of the lousy injection molding. The material is in high temperature and

Liquid silicone products have high transparency and no odor. The products have glue injection edges, no obvious mould pattern and hair edge defects. The appearance is more exquisite. Solid silicone products have low transparency, the smell of curing agents or

There are numerous ways to classify automotive plastic molds according to the different plastic corridor molding, and processing styles can be divided into the following orders.    -Injection mold The molding process is characterized by placing the plastic material in

What is undercut? I believe that those engaged in the injection molding industry know, so I will not repeat it. The undercut is not a complex problem in injection molding, but it is common in almost all injection molding factories.

I believe that the injection molding industry, injection molding technician positions above, have encountered the production process of injection molding products, due to water reasons, the production of products due to deformation caused by the lousy batch situation: deformation, visual

The injection moulding process mainly consists of 6 stages: mold closing – filling – holding pressure – cooling – mold opening –Demolding, and other 6 stages. These 6 stages directly determine the moulding quality of the product, and these six

Thermosetting plastics are phenolic, amino (melamine, urea-formaldehyde), polyester, polypropylene phthalate, etc. Mainly used for compression moulding, extrusion, and injection moulding. Silicone, epoxy resin and other plastics are used mainly as low-pressure extrusion packaging electronic components and casting moulding.   1.

There are numerous ways to classify automotive plastic molds according to the different plastic corridor molding, and processing styles can be divided into the following orders. – Injection Mold The molding process is characterized by placing the plastic material in

Thermoset injection molding uses a screw or a plunger to pass the polymer through a heated barrel (120-260°F) to reduce density and fit it into the heated earth (300-450 °F). Once the material fills the world, it’s held under pressure.