When the equipment malfunction, we have to understand where the cause of it is, exactly due to what reason, causing it to appear this phenomenon, to instantly do a good job in dealing with the liquid silicone injection molding machine is the same, then can not shoot glue treatment method is what?
- LSR machine injection nozzle is blocked by dirt. Check whether the injection nozzle is inaccessible, solution: clean or replace the injection nozzle.
- Split glue blocking. Disassemble the flange to check whether the nozzle is broken. Replace the glue nozzle.
- Shot glue direction valve stuck. Check the directional valve is not 24V voltage, coil resistance 15-20 ohms, such as normal valve blockage.
- Lliquid silicone injection molding machine injection piston rod broken. Loosen the rubber injection piston rod tight mother, check the piston rod is not broken. Replace the piston rod.
- The barrel temperature is too low. The actual temperature is not up to the melting point temperature of the material. Adjust the barrel temperature again.
- Shot rubber piston sealing ring destroyed. See whether the piston sealing ring has been damaged. Replace the sealing ring.
