Home » Products » Two Platen Vertical Injection Machine

Two Platen Vertical Injection Machine

This vertical plastic injection machine is suitable for large-scale products with inserts, and can be used in auto, electronics, daily necessities, toys, tools and other industries.

Two Platen Vertical Injection Moulding Machine Application

  • Two platen vertical injection moulding machine is suitable for large-scale products with inserts, and can be used in auto, electronics, daily necessities, toys, tools and other industries.
  • Representative product: plastic flower.

 

Equipment characteristics

  • With professional computer, high precision, fault computer self diagnosis, fault point is easy to found.
  • With the two platen center oil pressure locking mold, the clamping force is even, so that the product parting line is smaller and not obvious.
  • With a single slide, the table design is safe and convenient to operate. lt can install the automation equipment as fully automatically.
  • With the linear guide slide structure on sliding table function, it hit precise location and smooth operation.
  • With asynchronous servo energy-saving system; it hit higher precision and faster response; it can save 50%~70% energy than the common machine.

 

Advantages compared with traditional machines

  • With a linear track sliding structure without skateboard base to save space.
  • With clamping nut for stronger clamping structure. The working table is low and easy to installed, can be operated without additional operation table.
  • With the special mold-locking start high pressure structure, hit high pressure within 0.3second in a very short time.
  • The new structure design has lower oil temperature and the tank capacity is 30% from the traditional machine.
  • The mold clamping stroke is bigger space and is more suitable for deep cavity injection molding. It can be used in single color injection molding or mixed color injection molding.

 

MODEL UNIT MHLB-350-1S MHLB-450T
 

 

 

 

INJECTION UNIT

Screw Diameter mm Φ 40 Φ 56 Φ 90 Φ 95 Φ 100
Theoretical Shot Volume cm³ 285 935 3020 3365 3728
Injection Quality g 256 841 256 841 841
Max. Injection Pressure. Mpa (kg / cm²) 144 (1470) 325 (3318) 2808.6 (98.8) 3129.5 (110.2) 3467 (122)
Injection Rate cm³ 188 83.6 157.6 (1607.5) 83.6 83.6
Injection Speed mm / s 151 34 151 34 34
Screw Rotation Speed r.p.m 0~327 0~210 0~327 0~210 0~210
Nozzle Out of Platen mm ≥ 60 ≥ 60
 

 

 

CLAMPING UNIT

Clamping Farce KN (tf) 3430 (350) 3430 (350)
Clamging Stroke mm 730 730
Max. Mold Opening Distance. mm 730 730
Max. Mold Size. mm 920×580 920×580
Sliding Table Stroke mm 970 970
Ejector Stroke mm 110 110
Ejector Force KN (tf) 78.4 (8.0) 78.4 (8.0)
 

 

OTHERS

System Pressure Mpa (kg / cm²) 15.7 (160) 15.7 (160)
Oil Tank Capacity L 150 150
Motor Power Kw (HP) 15 (20) 15 (20)
Machine Dimensions (L×W×H) M 3.5×3.0×4.8 3.5×3.0×4.8

 

————————————————————- Sample Display ————————————————————-

Two Platen Vertical Injection Machine Min-Hui

REQUEST A QUOTE

GET A QUOTE