The clamping device of a vertical molding machine is crucial for plastic injection production. Therefore, after the installation of the molding machine, a comprehensive adjustment of the clamping device should be carried out.
So, how to adjust the clamping device of a vertical molding machine after installation? Here are the key steps:
1) Clean the mold thoroughly and then carefully install it in between the moving and fixed molds. Adjust the travel arrangement of the guide rail sliders according to the size of the plastic part and set the ejection stroke of the moving mold.
2) Adjust the ejection system to ensure that it can push the molded plastic parts out of the mold core into the designated distance.
3) Adjust the clamping force according to the specified manufacturing process, generally setting it to the lower limit of the required clamping force.
4) Adjust all limit switches to their respective positions and adjust the safety devices for mold closing.
5) Adjust the mold opening and closing speed and working pressure, generally setting the speed to a fixed value and the working pressure to the standard value.
6) The clamping device can only operate when all safety doors of the vertical molding machine are closed. Check if the equipment will stop working and issue an alarm when the safety door is opened.
By following these steps, the clamping device of a vertical molding machine can be properly adjusted to ensure safe and efficient operation.
