The clamping equipment of the plastic machine is particularly important for the injection molding production of the plastic machine, so after the installation of the plastic machine, it is necessary to carry out a multi-directional adjustment of the clamping equipment of the vertical parts molding machine!
So the question is, how to adjust the mold clamping equipment after the installation of the vertical parts molding machine, you will know it when you see it!
The adjustment key of the clamping equipment of the vertical part forming machine can be sorted out into the following aspects:
1) Scrub the mold neatly, and then install it in the middle of the moving mold properly, and then adjust the travel arrangement guide rail slider according to the size of the plastic parts, and limit the mold stroke arrangement of the moving template.
2) Adjust the ejection system so that the formed plastic parts can be pushed from the mold core into the predetermined spacing.
3) Adjust the clamping force according to the production process regulations, and generally adjust the clamping force to the low limit of the required clamping force.
4) Adjust all the limit switches to the respective parts and adjust the whole device of the mold closing.
5) Adjust the rate and working pressure of the opening and closing of the mold, generally adjust the rate to a fixed value, and then adjust the working pressure to the standard value.
6) The clamping equipment can only be carried out when the protective door of the vertical parts forming machine is closed, and check whether the equipment will stop working and send out an alarm when the safety door is opened.
