Injection Molding Machines Knowledge

What can be the problem with cooling water for injection molding production?

I believe that the injection molding industry, injection molding technician positions above, have encountered the production process of injection molding products, due to water reasons, the production of products due to deformation caused by the lousy batch situation: deformation, visual inspection is challenging to find, only when assembled with, only to find that the assembly

What can be the problem with cooling water for injection molding production? Read More »

What are the plastic properties of thermoset plastics?

Updated November 3, 2026. A thermosetting molding compound changes chemically as it cures. Its processing behavior is therefore described by more than a melting temperature. Resin chemistry, fillers, storage condition, temperature and time together affect the usable molding window. Flow and Cure Must Be Considered Together Heating can initially make a compound easier to process,

What are the plastic properties of thermoset plastics? Read More »

Injection Molding Troubleshooting: Symptoms, Evidence and Next Checks

Start troubleshooting by identifying the observed symptom and the equipment state. A machine alarm, a hot-material leak and a rejected molded part require different responses. Do not assume that every problem can be corrected by lubrication, clearing an obstruction or changing one setting. Record a Useful Baseline Keep the machine and injection-unit identity, material grade

Injection Molding Troubleshooting: Symptoms, Evidence and Next Checks Read More »

Material Temperature, Mold Temperature and Cycle Stability

Material temperature, mold thermal conditions and cycle timing must be reviewed together for a stable molding process. No single drying or processing temperature range is suitable for every resin. Identify What Each Reading Represents Drying conditions: follow the exact grade’s preparation requirements, including time and moisture criteria where applicable. Barrel or nozzle settings: identify the

Material Temperature, Mold Temperature and Cycle Stability Read More »