Standard Vertical Injection Molding Machine

The MINHUI MH standard vertical injection molding machine uses vertical clamping and injection for insert molding around electrical plugs, cable terminations and electronic connectors. Compare 15–250 tf models by clamping force, mold fit and the injection unit needed for your part.

minhui standard injection molding machine
Choose a machine video

Standard Vertical Injection Molding Machine Overview

Applications

Use the MH standard series for insert molding around electrical plugs, cable terminations, electronic connectors and other parts that need an accurately positioned insert.

Machine Features

  • Vertical clamping and vertical injection for insert molding.
  • Compare screw diameter, shot volume and injection pressure for your part and material.
  • Servo motor options are available. Confirm motor, controls, ejection and safeguarding for the configuration you order.

MH Standard Vertical Injection Molding Machine Specifications

Injection Unit Specifications

Read each row in the same order as the listed screw diameters. Injection weight is based on polystyrene (PS). Confirm the MH-250T injection unit with MINHUI for your project.

Injection unit specifications, MH-15T to MH-60T
ParameterMH-15TMH-20TMH-35TMH-45TMH-60T
Screw diameter (mm)26 / 2826 / 2826 / 28 / 3226 / 28 / 3226 / 28 / 32
Theoretical shot volume (cm³)55.7 / 64.655.7 / 64.661.5 / 71.4 / 93.268.6 / 86.1 / 112.586.1 / 112.5 / 142.4
Injection weight (PS, g)51.8 / 6051.8 / 6057.2 / 66.4 / 86.763.8 / 80 / 104.680 / 104.6 / 132.4
Maximum injection pressure (kgf/cm²)1164 / 10041164 / 10041677 / 1446 / 11071960 / 1563 / 11962170 / 1661 / 1312
Injection rate (cm³/s)35.5 / 41.253 / 61.541.4 / 48 / 62.770.3 / 88.2 / 115.273.2 / 95.6 / 121
Injection speed (mm/s)6710078143119
Screw rotation speed (rpm)0–1500–2000–1480–2400–270
Nozzle protrusion from platen (mm)303030≥45≥45
Injection unit specifications, MH-85T to MH-200T
ParameterMH-85TMH-120TMH-160TMH-200T
Screw diameter (mm)32 / 36 / 4036 / 40 / 4545 / 50 / 5555 / 60 / 65
Theoretical shot volume (cm³)112.5 / 142.4 / 175.8162.7 / 201 / 254318 / 392.5 / 475570 / 678 / 796
Injection weight (PS, g)104.6 / 132.4 / 163.5151.3 / 187 / 236.2295.7 / 365 / 442530 / 630 / 740
Maximum injection pressure (kgf/cm²)2331 / 1842 / 14922268 / 1838 / 14522263 / 1803 / 14302202 / 1851 / 1577
Injection rate (cm³/s)85.2 / 107.8 / 133.190 / 110.5 / 140174.8 / 216 / 261.2195 / 232 / 272
Injection speed (mm/s)1068811082
Screw rotation speed (rpm)0–3400–3000–3000–300
Nozzle protrusion from platen (mm)≥45≥45≥45≥45

Clamping Unit and Machine Specifications

Clamping and machine specifications, MH-15T to MH-60T
ParameterMH-15TMH-20TMH-35TMH-45TMH-60T
Clamping force (tf)1520354560
Opening stroke (mm)198198215200200
Minimum mold thickness (mm)3535 (100)60 (145)150 (200)180 (260)
Maximum opening (mm)233233 (298)275 (360)350 (400)380 (460)
Tie-bar spacing (mm)310310 × 130360 × 200430 × 250460 × 310
Ejector stroke (mm)3035353535
Ejector force (tf)1.31.31.71.71.7
System pressure (kgf/cm²)140140140140140
Oil tank capacity (L)6060110150170
Motor power (kW)2.2447.511
Machine dimensions, L × W × H (mm)1200 × 730 × 24001200 × 730 × 26001600 × 800 × 28001700 × 1300 × 28501800 × 1400 × 3000
Machine weight (t)0.650.851.32.12.6
Clamping and machine specifications, MH-85T to MH-250T
ParameterMH-85TMH-120TMH-160TMH-200TMH-250T
Clamping force (tf)85120160200250
Opening stroke (mm)250280300350350
Minimum mold thickness (mm)230 (330)280 (380)300 (400)350 (450)400 (500)
Maximum opening (mm)480 (580)560 (660)600 (700)700 (800)750 (850)
Tie-bar spacing (mm)510 × 360660 × 380740 × 420820 × 520900 × 580
Ejector stroke (mm)5595959595
Ejector force (tf)2.74.64.64.64.6
System pressure (kgf/cm²)140140140140140
Oil tank capacity (L)260320480480Confirm
Motor power (kW)1518.5222222
Machine dimensions, L × W × H (mm)2000 × 1500 × 34002200 × 1800 × 40002300 × 1900 × 45002500 × 2100 × 47003000 × 2500 × 5400
Machine weight (t)3.368.11113.6

Confirm the mold fit, the configuration for dimensions shown in parentheses, and the MH-250T oil tank capacity before ordering. Source: MINHUI product catalog, MH standard series, pp. 31–32.

Standard Machine Platen Drawings

Standard Injection Schematic

MH standard injection Schematic

Standard Injection Sample Display

Typical products include power cord plugs, USB connectors, headphone jacks, and other wire-related components.

Standard Injection Molding Machine Min-Hui

Choosing a Standard Vertical Machine for Insert Molding

When Should I Compare a Fixed Table with Sliding or Rotary Tables?

The standard arrangement described here uses a fixed lower mold and a moving upper mold. Compare insert loading, part removal and the complete cycle with sliding table or rotary table layouts when planning the production cell. A station change alone does not guarantee more output.

Is Clamping Force Enough to Select a Machine?

No. Check shot volume, the screw option and material basis, mold dimensions and weight, opening and ejection requirements, insert location and cable clearance. Match the selected model sheet with the corresponding platen drawing linked above.

How Should Inserts Be Held?

The mold or a dedicated fixture must locate and retain the inserts through the intended molding sequence. Vertical orientation does not guarantee that a terminal or cable will remain in position. Evaluate the proposed tooling with representative inserts.

Does Low-Pressure Mold Protection Replace Operator Safeguarding?

No. Mold protection and personnel safeguarding are separate checks. Review the supplied guards, interlocks and operating instructions for the complete cell. Do not infer a personnel-protection guarantee from a low-pressure mold-closing description.

What Information Helps Evaluate a Connector Project?

Provide drawings of the part and inserts, resin grade, shot and runner volume, cavity count, mold details, loading sequence, target output and acceptance tests. Electrical or other finished-component compliance requires separate verification. Use the vertical machine selection checklist to prepare the remaining factory and service requirements.

GET A QUOTE