Epoxy Resin Injection Pressing Machine
The MINHUI epoxy resin injection pressing machine is designed for applications such as molding around motor rotors. Review the 60 tf model, its single sliding table and the mold opening before planning your rotor fixture, loading sequence and tooling.
Epoxy Resin Injection Pressing Machine Overview
Applications
Evaluate this machine for epoxy resin molding around motor rotors and similar molded assemblies. Specify the resin grade, rotor drawing and how the insert must be held during pressing.
Machine Features
- A single sliding table moves the mold between the processing position and the loading and unloading position.
- Four-column clamping and PLC controls with fault diagnostics.
- Confirm the rotor fixture, mold heating, cooling-water connections and any robot or runner-removal equipment for the quoted cell.
60 tf Injection Pressing Machine Specifications
The MINHUI injection pressing specification sheet identifies this machine as MY-60T-S1. Confirm the current model designation, motor power and installation requirements for the machine you order.
| Parameter | Unit | MY-60T-S1 |
|---|---|---|
| Screw diameter | mm | 50 |
| Theoretical injection volume | cm³ | 255 |
| Injection pressure | kgf/cm² | 315 |
| Injection rate | cm³/s | 235 |
| Injection speed | mm/s | 120 |
| Clamping force | tf | 60 |
| Clamping stroke | mm | 300 |
| Minimum mold thickness | mm | 700 |
| Maximum opening | mm | 1,000 |
| Tie-bar spacing | mm | 670 × 430 |
| Sliding table size | mm | 700 × 650 |
| Ejector stroke | mm | 200 |
| Ejector force | tf | 4.6 |
| Hydraulic system pressure | kgf/cm² | 140 |
| Oil tank capacity | L | 140 |
| Machine dimensions (L × W × H) | mm | 3,100 × 1,100 × 4,100 |
Motor Rotor and Molded Part Samples
Injection Pressing for Epoxy and Rotor Projects
Does “Injection Pressing” Define a Universal Process?
No. Confirm the material feed form, injection/pressing sequence, mold heating and material preparation for the specific compound. Do not assume that a thermoplastic injection recipe applies to an epoxy system.
What Should Be Checked for a Rotor or Insert Assembly?
Provide the assembly drawing, material grade, insert envelope, fixture and location requirements, allowable movement, mold details, fill path, venting and ejection requirements. Define measurable acceptance criteria for the actual assembly.
What Does the Single Slide Provide?
It provides a handling arrangement outside the molding position. Confirm complete-cell access, guarding, interlocks and the operating sequence. A slide description alone does not establish a personnel-protection guarantee.
Are Robots and Automatic Runner Removal Included?
They must be explicitly included in the quotation and integration scope. Check access, gripper and runner interfaces, detection, handshaking and the complete operating sequence.
Where Are the Actual Ratings?
Use the specification table above and request the current model sheet, installation drawing and configuration. Confirm machine services, heating/cooling requirements and any test conditions before comparing output or energy.
Use the vertical machine selection checklist; material compatibility and performance must be evaluated for the proposed project.