How to Read BMC Injection Molding Machine Specifications Before Buying

When comparing BMC injection molding machine specifications, start with your compound, part and mold drawings. A higher clamping force tells you how much force the press can apply to hold the mold closed. You still need to check whether the mold fits, whether the parts can be removed and whether the injection unit can deliver the required shot of bulk molding compound (BMC).

Check Mold Fit Before Choosing a Tonnage

  • Clamping force: Review the total projected area of the cavities and relevant runners, together with the expected cavity pressure for your process. Ask the machine supplier to check the required force against your tool design and compound.
  • Platen size and tie-bar spacing: Check the mold base dimensions, mounting pattern and installation route against the machine drawing. For a press with tie bars, check the clear space along the loading path, including any fittings that extend beyond the mold base.
  • Mold thickness, opening stroke and maximum opening: Confirm the supported mold thickness for the quoted configuration. Then check the opening available with your mold installed. Allow room for ejector travel, finished-part removal and insert loading where applicable.

Compare the Injection Unit at the Screw Size You Plan to Buy

A specification sheet may list several screw diameters for one machine. Read the theoretical shot volume, reference injection weight and maximum injection pressure from the same screw option. The MINHUI MHD-45T and MHD-2R-45T catalog table shows how those values change together.

Two screw options from the MINHUI MHD BMC/Bakelite catalog, p. 42
Parameter26 mm screw32 mm screw
Theoretical shot volume63.8 cm³104 cm³
Reference injection weight (PS)59.3 g96.7 g
Maximum injection pressure1,960 kgf/cm²1,195 kgf/cm²

In this example, the 32 mm option has a larger theoretical shot volume and a lower listed maximum injection pressure. The listed weights use polystyrene (PS) as the reference. For BMC, ask the supplier to check the usable shot capacity against your actual compound and the combined cavity and runner volume. Include any trial or acceptance requirements in the quotation request.

Review Compound Feeding and Heated Tooling

Ask which feeding system, barrel and screw are included for your BMC grade. Share the material supplier’s processing data and confirm who supplies the mold heating controls. If the job includes inserts, walk through the loading and removal sequence with the supplier so the proposed table layout, guarding and access fit the way you intend to run the cell.

What to Include in a BMC Machine Quote Request

  • The compound supplier, grade and processing data.
  • A part drawing, cavity count, and part and runner weights or volumes.
  • The mold drawing, outer dimensions, closed thickness, and opening and ejector requirements.
  • Insert handling, automation and output requirements, plus the available factory power supply.

Use the MINHUI BMC injection molding machine model tables to shortlist configurations. Share your project details with MINHUI and request the current model sheet, platen drawing and quoted injection unit before making a final selection.