Two-Platen Vertical Injection Molding Machine
The MINHUI MHLB two-platen vertical injection molding machine is designed for larger molded parts with inserts. Compare the MHLB-350T-1S and MHLB-450T by injection unit, mold opening and handling requirements to find the configuration for your tooling.
Two-Platen Vertical Injection Molding Machine Overview
Applications
Evaluate the MHLB series for larger molded parts with inserts in automotive, electronics, consumer goods and tooling applications. Check the actual mold depth, insert-loading clearance and part-removal path for your project.
Clamping and Mold Handling
- Two-platen vertical clamping with a hydraulic locking arrangement.
- The MHLB-350T-1S uses a single sliding table for loading and removal. Confirm the layout, safeguarding and any automation interfaces for the quoted machine.
- The MHLB-450T uses a linked four-cylinder clamping design. Request the current machine layout and clamping data for your mold.
MHLB Two-Platen Machine Specifications
These reference values come from the MINHUI MHLB product sheet. Read the shot volume in the same order as each screw diameter. Request the current model sheet to confirm the injection unit, mold fit and installation dimensions before ordering.
| Parameter | MHLB-350T-1S | MHLB-450T |
|---|---|---|
| Screw diameter (mm) | 40 / 56 | 90 / 95 / 100 |
| Theoretical shot volume (cm³) | 285 / 935 | 3,020 / 3,365 / 3,728 |
| Clamping force (kN / tf) | 3,430 / 350 | Confirm for quoted model |
| Clamping stroke (mm) | 730 | Confirm for quoted model |
| Maximum mold opening (mm) | 730 | Confirm for quoted model |
| Maximum mold size (mm) | 920 × 580 | Confirm for quoted model |
| Sliding table travel (mm) | 970 | Confirm for quoted model |
| Ejector stroke (mm) | 110 | Confirm for quoted model |
Two-Platen Injection Molding Samples
Two-Platen Selection: Mold Space and Complete Cell Layout
Does “Two-Platen” Specify Shot Capacity or Number of Colors?
No. It describes the clamping architecture. Injection capacity, screw option, material system and any multi-component capability must be confirmed separately in the selected configuration.
Which Mold-Space Dimensions Matter?
Check mold length, width, height and weight; mounting interfaces; opening and daylight; ejection; nozzle access; and the handling envelope. A general statement about large opening space does not prove that a particular deep-cavity mold will fit.
Does a Compact Clamp Guarantee a Smaller Production Cell?
No. Compare the complete layout, including slide travel, insert loading, part removal, automation, services and maintenance access. Use the actual installation drawing.
How Should Speed, Energy and Oil-System Claims Be Compared?
Request the selected model data and test conditions. Compare complete-cycle performance under the same part, mold, material and auxiliary-equipment conditions. No universal pressure-build time, oil-volume reduction or energy-saving percentage is specified here.
Review the model specifications above and the vertical machine selection checklist. Compare sliding table handling using the proposed tooling and sequence.